Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

Selle Royal Respiro
$59.99
Ride comfortably on even hot days with Selle Royal's Respiro saddle. It boasts a Cool Cover that keeps the saddle up to 25 degrees cooler, and an innovative ventilation channel to keep the air flowing. Complementing these extraordinary features is Selle Royal's Royalgel that eliminates pressure points for awesome plushness. And, this amazing saddle comes in three models so you can choose the perfect fit. If you want the ultimate in breezy comfort, this is it!
Bontrager Sport Women's Saddle
$34.99
Key features: - Fitness Posture 4 features an upright pelvic rotation to go farther, faster - Engineered specifically to yield better fit and greater comfort for women - Contour Relief Zone Plus (CRZ+) full saddle cutaway enhances soft tissue protection - Tough, weather-resistant cover repels water - Sleek, supportive padding provides comfort while maintaining performance
Crank Brothers Eggbeater 1
$59.99
Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.
ESI Racer's Edge Grips
$16.99
Best suited for the acknowledged weight weenie and thin grip lovers. 50 grams, standard grip length - 5 1/8", installed DIA. 30 mm, weight plus or minus 5%, 1 set of bar plugs included. - 50 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 30mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
ESI Chunky Grips
$18.99
Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
SRAM PC-1091R 10-Speed Hollow Pin Chain
$52.00
SRAM’s premier 10-speed chain features hollow pins and cut-out outer plates for accurate shifting in all conditions, light weight, strength and smoothness. Plus, it's compatible with all industry-standard 10-speed systems. And, with its great PowerLock connecting link, installation and removal is a snap.
SRAM MRX Comp Rear Twist Shifter
$9.00
SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a 2:1 Shimano rear derailleur.
ODI Hucker Signature BMX Flange Grips
$12.95
Mike “Hucker” Clark brings his SoCal attitude to life with the new Signature Hucker Grips. Designed for both aesthetics and performance. The 160mm grip’s California-inspired beach scene has been intricately laid out to provide traction and padding in key areas where they are needed most. - Features a unique two material design that allows for improved bar adhesion and less grip slippage - Soft vertical ribs provide excellent padding - Horizontal ribs on front of the grip offer improved traction
Crank Brothers Stamp 7 Pedals
$150.00
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)
Shimano Tourney TY501 Crankset
$26.99
The Tourney TY501 crankset provides crisp, reliable shifting for your triple chainring drivetrain. - Precision indexed shifting - 8/7/6-speed compatible - 3 crank length specification available - Precise chain line control - Light and reliable shifting - Versatile performance - Wide compatibility with multiple components - Quick and precise assembly
Oury Lock-On Bonus Pack
$29.99
The classic Oury feel updated with lock-on from ODI. Bonus pack includes snap-caps and Lock Jaws. - Made by ODI - Snap-caps and Lock Jaws included - Flange: No - Lock On: Yes - Grip Shift Specific: No - Length: 120mm - Shape: Round - Weight: 84g
Bontrager Blendr Pro Stem Bases
$14.99 - $19.99
Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager Pro Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look
Delta Stem Raiser
$29.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap
Selle Royal Lookin
$49.99
Ride comfortably on even the hottest days with Selle Royal's Lookin saddle. Its Cool Cover top keeps the saddle up to 25 degrees cooler. In addition to the lower temperatures, the Royal Vacuum Light construction keeps the weight to a minimum. And last but far from least, Selle Royal's Royalgel eliminates pressure points for ride-all-day plushness. Lookin saddles come in four styles, sure to fit your personal preferences.
Bontrager XR Trail Elite MTB Grip Set
$24.99
A durable lock-on grip with a unique finned texture for added comfort and control on the trail. Get a grip on sustainability The XR Trail Elite mountain bike grip has a finned texture that forms to your hand to keep you comfortable on all-day riding sessions. A higher density material surrounds the end of the grip for added durability and the lightweight CoreLock clamp holds the grip securely in place for confidence on even the most technical trails. You and your hands will both feel good knowing that the grip's core is made from recycled ocean-bound plastics. Product details - Finned texture pattern conforms to your hand for supportive grip - Rubber compound and tread design are optimized for control and comfort - Grip core made with recycled ocean-bound plastic - Single-clamp design maximizes grip surface for secure, predictable performance - Alloy core-lock clamp eliminates slipping by securing grip core to bar - Higher-density end cap resists scraping for added durability - 3mm M4 bolt increases hold and resists stripping - 31mm diameter
Bontrager Blendr Elite Stem Bases
$7.99
Clean up your Bontrager Elite stem cockpit with Blendr Elite bases. Blendr works with this simple formula: Stem + Base + Mount. Add accessory. Key features: - Bases for use with Elite stem - Add any XXX accessory mount for an elegant integrated look
Bontrager Elite Stem
$64.99
The perfect fit The Bontrager Elite Blendr Stem provides easy solutions for accessory integration. This alloy stem is light and strong, and it gives you endless options to integrate lights, a computer and more with Blendr accessory integration. Product details - Blendr Elite allows seamless accessory integration - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Approved for carbon bars and steerer tubes - Suitable for both MTB or road use - Includes Blendr mono base and accessory mounts
Bontrager RXL 7 Degree Factory Overstock Stem
$89.99
A traditional, lightweight, alloy stem with increased compliance for road and MTB use. Light as carbon. Strong as hell. The super compliant 7050-T6 aluminum alloy Race X Lite bike stem is light enough for the road but strong enough for the mountain. It features a flip-flop 7 degree rise and 31.8 clamp that help it excel in lightweight versatility for a variety of hand positions. - 7050-T6, 3D, forged alloy construction - 4-bolt face plate helps distribute clamping load on ultra-lightweight handlebars - Angled steerer tube clamp spreads clamping pressure on steerer and is carbon friendly - Countersunk, corrosion-resistant steel bolts do not require washers - Dual clamp bolts are strategically positioned to evenly distributing clamping forces - This stem requires at least 5mm of spacers above and below the steerer tube clamp area - Go green and save green – Zero packaging means zero waste and zero extra cost
Bontrager Gel Cork Tape
$19.99
Key features: - Gel tape with natural cork feel - Ideal stretch for quick and easy installation - Inner gel strip for extra comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing
Bontrager Pro Blendr Stem
$114.99
The forged alloy construction of the Bontrager Pro Blendr Stem delivers stiffness without compromising its light weight or sleek looks. Easy integration of lights, a computer, and more with the Blendr integration system make this stem a perfect upgrade for any bike. - Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems - 4-bolt dual band clamp securely holds handlebar - Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec - Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts - Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories - Approved for carbon bars and steerer tubes - Safe installation requires 5mm spacer above and below stem - Included Blendr accessories: Pro Mono Base, Trip Computer mount, and High Ion Light mount
CeramicSpeed ITA Bottom Bracket for SRAM DUB Road
$459.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The ITA for SRAM DUB Road comes in two bearing options. The first option is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second option is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: Italian BB - Opening diameter: Threaded - Shell width: 70mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet - Spacer tube
Bontrager Elite IsoZone VR-SF Road Handlebar
$99.99
Goodbye, chatter Ready to ditch the wrist fatigue that accompanies rough road rides? IsoZone foam pads are integrated directly into the tops of the alloy Elite IsoZone bar for a 20% displacement in vibration. Features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. Soak up the chatter and ride on in comfort while enjoying a better looking cockpit. Product details - Custom-butted, 6066-T6 alloy construction - Confidently access brake levers while in the drops with our VR-SF shallow, flared drop and shorter reach design - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing - Compatible with clip-on aero bars - Shot-peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control set-up
Fizik Vento Argo R1
$224.99
VENTO ARGO R1 is a performance racing saddle with a short-nose design that improves stability and allows for a more aggressive, aero riding position. Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution. Vento Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts. Argo is our most versatile saddle shape and each version suits different riding styles. As the racing option, Vento Argo has been engineered to deliver a riding feel that suits race bikes with aggressive geometry. The padding is made from fizik's proprietary Type 1 foam formulation, which has a lower profile and is reactive and springy for instantaneous response and optimal power transfer. The purposeful shape of its design helps you achieve a better riding posture: the dropped nose supports the pubic ramus when the pelvis rotates forward to add power or to get more aero. Argo is a product of the fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance. - Argo: a versatile short-nose saddle that encourages stability and relieves pressure on soft tissue area - R1: a combination of a ride-compliant carbon-reinforced nylon shell and a highly stiff carbon rail - Type 1 foam: low-profile, reactive and springy for efficient power transfer SPECIFICATIONS: VENTO ARGO R1 140 - Length: 265mm - Width: 140mm - Weight: 179g - Height at 75mm width: 41mm - Length from nose to 75mm width: 114mm - Rail: 10 x 7mm SPECIFICATIONS: VENTO ARGO R1 150 - Length: 265mm - Width: 150mm - Weight: 186g - Height at 75mm width: 41mm - Length from nose to 75mm width: 114mm - Rail: 10 x 7mm
Bontrager Carbon Stop Cork Brake Pads
$36.99
The Bontrager Carbon Stop Cork pad was engineered by Keith Bontrager specifically to work with carbon rims. Designed to dissipate heat on long descents and decrease rim wear, they will keep you coolly in control on even the most challenging mountain stages. Key features: - Engineered especially for use with carbon rims - Designed by Keith Bontrager for professional cyclists - Unique cork compound reduces braking heat and wear on rim
Trek International Disc Brake Mount
$14.99
Add a rear disc brake to your 2001 and later Trek, Klein or Gary Fisher bicycle with this International Disc Brake Mount. Please note, disc brake and disc compatible wheel hub sold separately.
Bontrager Arvada Comp
$89.99
Comfortable performance for road or trail Arvada Comp adds comfort and reduces soft tissue pressure by creating a strategic cut-out in the saddle shell. This allows the softer finishing material across the shell cut-out to be more compliant, resulting in added comfort for the rider. With Arvada Comp, you get the benefits of a cut-out saddle with the classic look and feel of a more traditional design. Key features - Performance Posture 3 for pelvic rotation with a balance of comfort and efficiency - Channel Flex on bottom of shell for added compliance - Zone Density shell construction is strategically placed for optimal comfort and performance - Size Specific Curvature ensures each saddle is designed specific to its width - inForm BioDynamic products optimize your natural movement for sustained, higher performance
Shimano Altus M315 Rapidfire Plus Shifter
$19.99
For reliable mountain bike shifting, Shimano's SL-M315 RAPIDFIRE shift lever is suited to quick shifting, giving riders the ability to downshift three gears in one stroke. - Slim main lever body - OPTISLICK for smooth shifting performance - Gear display positioned below the handlebar - Numbered gear display indicates gear position at a glance - Light shifting operation, wider compatibility, and suitable for internal cable routing - Streamlined cockpit experience
Bontrager Satellite+ Isozone Bar End Adapter
$14.99
These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars. - Required for bar end use on Satellite Plus Isozone bars - For use with clamp style bar ends - Includes 2 adapters and 2 rubber handlebar inserts. - Bar end sold separately
SRAM DUB PF30 Bottom Bracket
$50.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
SRAM PowerLock Eagle Chain Connector 12-Speed
$17.00
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
Page 1 of 18 Next page