Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$50.00 - $25,000.00
The most advanced foam ever used in bar tape along with an extremely long wearing and tacky top layer, this is the ultimate in comfort. - 2.5mm of cushion similar dampening to 3.5mm in other tapes. - Laser engraved aluminum end plug. - Fully adhesive finishing tape. - Butterfly clamp cover that doesn't add bulk. - SILCA Crash Replacement Program
$1,309.99
A vital tool for serious cyclists, the DURA-ACE FC-R9200-P power meter delivers reliable, waterproof, dual-sided power measurement. With a rechargeable battery and Bluetooth®LE and ANT+ connectivity, the FC-R9200-P is a user-friendly training partner. The DURA-ACE FC-R9200-P power meter brings everything a data-driven cyclist could want. Its integrated, waterproof design brings all-weather reliability while delivering accurate information including left/right balance. A rechargeable Li-ion battery is user-friendly and Bluetooth®LE and ANT+ connectivity ensure easy setup. Integrated, waterproof, and rechargeable Li-ion battery - Up to 300+ hours of ride time * Depending on ANT+/Bluetooth®LE settings Accurate data collection - < 1.5% strain gage accuracy throughout the entire calibration range * Depending on ANT+/Bluetooth®LE settings - Proprietary strain gauge Possible to start quickly - Simple zero offset calibration with switch on transmitter Active temperature compensation - Software automatically compensates for temperature changes
$753.00
More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready. - XC focus and trail ready - Carbon cage - Ti hardware - Rainbow colorway - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available. - Battery sold separately
$699.99
Rally XC100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally XC100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation
$681.99
An integrated bar and stem combo that cleanly and securely holds cables for a refined look and added aerodynamics. Save watts, ride faster This aero upgrade cleans up your cockpit by securely storing cables for a refined look and free speed. The Aeolus RSL bar/stem combo is proven in the wind tunnel to save 7 watts, making it 10% faster than its predecessor. It's light, fast, easy to install, and Blendr-compatible for seamless integration of your light or Garmin. Details: - OCLV Carbon construction is ultra-light, compliant, and durable - Integrated bar/stem design improves aerodynamics and saves weight - Proven in the wind tunnel to save 7 watts, making it 10% faster than its predecessor - Integrated cable management system held secure with M4 hex bolt, 5Nm torque - Variable Radius Compact (VR-C) design allows longer reach and drop - Includes Blendr mono and duo bases with mounts for Ion light and Garmin computer - Approved for use with carbon or alloy steerer
$638.00 - $673.00
Fully wireless electronic shifting. Fully hydraulic disc braking. The SRAM RED eTap AXS HRD shift-brake system is the future. And the future is custom. AXS enabled and easily personalized for hand size and reach, this is the best shifting and braking experience — for all riders. - AXS-enabled for easy personalization - Simple and intuitive eTap shift logic - Personalize for your hands and preferences using the Contact Point Adjustment and separate Reach Adjust with HydroHC brake platform - Newly textured shift paddles and hoods for a better feel - Two ports for Blips on each lever - Bleeding Edge technology for easy and clean brake bleeds - Available in flat mount and post mount caliper options
$649.99
Rally RK100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RK100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite LOOK KEO cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 334g - Water resistance: IPX7 - Cleat type: KEO - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RK100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation
$649.99
Rally RS100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RS100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD-SL cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 328g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation
$633.00
The day-in, day-out Eagle ecosystem hero is now available with AXS. The GX AXS upgrade kit is your entry point into wireless drivetrain simplicity. Compatible with any of our Eagle ecosystem cassettes and crank arms, the upgrade kit allows you to experience AXS without needing to buy an entire groupset—provided you already are using Eagle products. No matter if you are looking to upgrade your ride or looking for great value replacement parts, look no further than the GX AXS upgrade kit. - Includes the SRAM GX Eagle AXS rear derailleur with battery, Eagle controller with clamp, charger with cord, and chain gap tool - The GX Eagle AXS rear derailleur shifts on command, whether under climbing load or sprinting to the stage finish, and is smart enough to protect itself thanks to its incredibly resilient Overload Clutch - Rear derailleur is compatible with 10-50t and 10-52t cassettes - The GX Eagle AXS controller offers a unique wireless shifting experience with ergonomic touchpoints that are customizable to your preferences. You can choose what each button does through the AXS App
$550.00
The XX Eagle T-Type 12-Speed 10-52t cassette is a major reason why Eagle Transmission offers one of the best-ever inboard and outboard shifting performance under load. Thanks to its full X-Sync design, the harder you pedal, the better it shifts. Literally. Engineered as integrated and interdependent transmission components, the XX Eagle Transmission Cassette and derailleur contact directly, ensuring perfect alignment on every bike. - From its massive 520% gear range, the 52 tooth cog steps down with improved gear progression with 44 and 38 tooth cogs in the low end (compared to the Eagle drivetrain 10-52-tooth cassette) - Lasts far longer and delivers more precision with the use of less extreme chain angles throughout the entire range - Featuring a clearly marked Setup Cog, install is both simple and fool-proof - Utilizes hardened tool steel machined X-Dome design for the cluster and stamped steel 38t and 44t cogs are pinned to the lighter weight aluminum 12th gear (Spider Cog) - 55mm chainline compatibility for more moderate chain angle, longer wear and greater precision - Utilizes well accepted and broadly available XD driverbody
$536.99
Your time on the bike is precious, let Shimano make it even better. Ultegra ST-R8170 brake levers bring enhanced modulation and control to every ride by employing Shimano's proven SERVO-WAVE technology. The Di2 platform untethers the shifters while delivering fast and reliable wireless shifting. BR-R8170 disc brake caliper brings a new level of control to the road cycling world with improved modulation and a quicker initial braking point. Despite its smaller construction, the system is quieter than ever and easier to maintain. - The wireless connection provides a clean cockpit, enhancing the aerodynamic effect and easy maintenance - Wider pad clearance decreases brake noise - Maintenance-friendly bleeding process - Unparalleled ergonomic features, such as raised hood peaks on levers - Brake control is optimized with light and smooth lever action - Enhanced modulation thanks to an expanded braking control area - Compatible with wireless or wired connection
$479.99
Designed, tested and manufactured in RaceFace's Canadian facility, the Next SL G4 crank combines proven Race Face carbon bonding technology with the versatile CINCH interface for the lightest crankset in the Race Face lineup. It features fully hollow carbon crank arms and a super alloy pedal insert for maximum weight reduction with improved lateral stiffness; a critical advantage when the chain is under tension at extreme angles like experienced with a 1x system. Interchangeable spiders, limitless ring combinations, a 30mm alloy spindle and compatibility across all relevant frame standards means a future-proof crank with versatility to meet all your power transmission needs. - Direct mount chainline: 51, 57.5mm (flipped) - 2x Cinch spider chainline: 49.5mm - Boost 2x Cinch spider chainline: 52.5mm - Spindle interface: RaceFace Cinch - Weight: 430g (w/ 32T direct mount ring and no BB)
$425.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.7 Carbon Cantilever Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using the proven technology of a delightfully stiff and compliant UD carbon fiber construction. It all results in an enhanced riding experience and adds up to performance that you can count on. - Cantilever brakes with 22mm posts - 51mm clearance between fork blades - Includes compression plug - Axle to Crown Length: 392.2 mm - Brake Mount (Fork): Canti Studs - Crown Race: 30 - Front Axle: 10mm x 100mm - Material: Carbon - Maximum Tire Clearance (Fork): 48mm - Offset: 45 mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300 mm - Steerer Type: Straight - Wheel Size: 700c
$393.00 - $415.00
The XG-1295 cassette carries with it the X-DOME architecture, which, independent tests have concluded, yields the strongest cassettes on the market. Shifting characteristics improve both inboard and outboard shifting as well as chain retention. - SRAM’s cassette manufacturing technology provides the greatest durability and lightest weight - All-new shifting features create a smoother, quieter system with enhanced inboard and outboard shift performance - XD driver body compatible Cogs - 10 – 50T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 50 - 10 – 52T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 52
$409.99
With the fast and accurate Di2 shifting technology, the Shimano 12-speed Ultegra RD-R8150 rear derailleur is extremely versatile thanks to a single cage length option compatible with 11-28, 11-30, and 11-34 cassettes. - Compact design includes an integrated wireless unit, charger, switch - Wider range capacity - Max. low sprocket 34t - LED status indicator - Battery indicator, pairing, adjust mode etc.
$404.99
Shimano Ultegra ST-R8020 mechanical shift and hydraulic brake dual control lever and BR-R8070 flat-mount brake caliper. This dual control lever features Servowave brake lever technology, making initial pad travel very fast, so little lever movement is needed to bring the pads into contact with the rotor. The power multiplication factor then increases rapidly at the pad-to-rim contact so more of the lever stroke is used to apply greater braking power with improved control. - The double hydraulic brake/mechanical shift lever is equipped with a reach adjust mechanism, meaning the distance from the handlebar grip to the lever can be adjusted to suit any hand size - Servowave brake technology means instant response and maximum modulation. - The Ultegra BR-R8070 flat-mount caliper is designed with one way bleeding technology which prevents air from entering the system and is easy and clean to maintain - Caliper also features Shimano's Ice Technology to reduce heat buildup for constant, stable braking
$404.99
The Ultegra ST-R8070 series shares the same Di2 electronic shifting technology as Dura-Ace at a more affordable price. Featuring hydraulic-actuated brake operation and improved ergonomics for all-day riding comfort and performance. - Clearer separation between the buttons ensures precise shifting even when the rider wears thicker gloves - Multi-Shift can be switched on or off individually for each switch - The buttons under the top cover can be programmed to control third-party devices - All features are customizable with Shimano’s E-Tube app or PC software
$404.00
Whether you're discovering the mountain for the first time or you're an MTB lifer searching for a no-nonsense, no-worries 1x drivetrain, SRAM NX Eagle is ready for action and ready to take you there. NX Eagle brings you a wide range of gear choices engineered for simplicity and durability, so you can focus on what matters most: the ride ahead. German engineered and proudly bearing the SRAM Eagle stamp of approval, NX Eagle is ready to let the world know what real riding feels like. Includes - Crankset: DUB 12-speed BOOST with DM 32T X-SYNC Chainring - Rear Derailleur - Trigger Shifter with Clamp - Chain: 12-speed, 126 links - Cassette: PG-1230 11-50T - Chaingap Gauge
$400.00
The X0 Eagle T-Type 12-Speed 12-Speed cassette is a major reason why Eagle Transmission offers one of the best-ever inboard and outboard shifting performance under load. Engineered as integrated and interdependent transmission components, the X0 Eagle T-Type Tranmission Cassette and derailleur contact directly, ensuring perfect alignment on every bike. Beyond its unique and stunning Dark Polar finish and electroless nickel plating for incredible resistance to corrosion and wear, its full X-Sync design literally means the harder you pedal, the better it shifts.
$356.00 - $397.00
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring
$377.00
One rear derailleur to rule them all. The SRAM Force eTap AXS rear derailleur is designed for both 1x and 2x systems. It capitalizes on X-Range gearing technology for enhanced range and chain management and features larger pulleys for improved durability and efficiency. Strong, smooth, quiet and AXS enabled. - SRAM AXS enabled, allowing easy personalization - Orbit chain management technology keeps the drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Larger X-SYNC pulleys for increased durability and efficiency - NOTE: Does not include eTap battery. Compatible with existing eTap batteries.
$377.00
The workhorse of X-Range gearing, the SRAM RED XG-1290 cassette progresses fluidly and quickly through a wider range of gears. It's specifically designed for wireless electronic shifting and the one-piece design offers you the best in weight savings. - Updated design for smoother and faster shifting - More gradual gear progression between cogs—at least five one-tooth jumps—while still offering a wider range - 10-tooth start helps provide a wider gearing range - Designed to work with an XDR driver body - One-piece machined steel X-Dome design for weight savings - All Zipp wheels starting from 2012 are XDR ready - Version: D1 - 10-26T: 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 23, 26 - 10-28T: 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 24, 28 - 10-33T: 10, 11, 12, 13, 14, 15, 17, 19, 21, 24, 28, 33
$375.00
The SES AR Handlebar reveals our vision for the future of road handlebar shaping and design. Purpose-built for the modern road rider, the SES AR handlebar features compound flared drops for confident handling, aerodynamic shaping with internal/external routing options for clean airflow and aesthetics, and a carbon laminate that has been tuned for responsive handling without sacrificing comfort. - Application: Road Race, All-Road, Gravel, Cyclocross - Sizes: 38cm, 40cm, 42cm, 44cm, 46cm - Weights: 243g, 245g, 248g, 262g, 280g - Full Integrated Internal or External Routing - Lifetime Incident Protection and 5 Year Factory Warranty
$367.99
Shimano Ultegra TT/Triathlon dual control lever. - Reduced drag through a more aerodynamic design - Eliminated the switch box of ST-6871 to make the design smaller and shorter - Intuitive shifting control - Keep firm when shifting - Single button on each side of the shift lever only works with Synchronized Shift - 2x11-speed - Average Weight: 138 g/pair
$359.99
The uninterrupted shifting experience of the Shimano Dura-Ace R9200 12-speed cassette range lets you climb, sprint, and push your limits without stopping to think about your next gear change. Larger driving cogs maximize drivetrain efficiency and create compatibility with both Shimano 11 and 12-speed freehub bodies. Shimano HYPERGLIDE+ technology is integrated to provide seamless shifts both up and down the gear range. - Faster, seamless shifts under maximum pedaling load - Refined 12 step gear combination provides peak efficiency and accelerating performance for every situation - Compatible with 12-speed and road 11-speed freehub body
$346.00
The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a more reinforced outer chainring on its unique asymmetrical four-arm spider construction. - Chainring BCD: 110 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Outer
$340.99
Unparalleled comfort A carbon road handlebar with IsoCore that reduces road vibration by 20% and features a variable compact radius that offers additional ergonomic positions. Chain-rattling pavement is no longer an issue thanks to our innovative IsoCore technology in this Pro IsoCore VR-CF road bar. An additive to the carbon layup, IsoCore mutes 20% more vibration than other carbon bars. Features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. Once you experience the comfort and control of IsoCore, you'll never want to ride another bar. - OCLV carbon with IsoCore continuous inner-laminar technology - Replaceable IsoZone EVA pads maintain original grip diameter - Variable Radius Compact Flare (VR-CF) bar shape offers greater comfort in all hand positions - IsoCore technology decreases road vibration by 20% over traditional carbon bars - Compatible with clip-on aero bars - Includes four replaceable EVA IsoZone pads for tops and drops - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing
$329.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model fork is tailored for larger-sized racers and therefore includes a lightweight 1-1/8 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts. Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard FEATURES - 1-1/8 Inch 7000 Series Aluminum Steerer Tube - Standard Size Fork for Larger-Sized Racers - Internal Butterfly Steerer Tube and Fork Crown Interface - 10mm Standard Dropouts - Cold-Forged and Bonded Dropouts COMPATIBILITY - Box Two 1.1/8" Integrated Headset - Box One Carbon 45x45 1.1/8" Integrated Headset - Box Two Threadless Headset - Box Two Headset Spacers - Box One Front Load Stem - Box One Top Load Stem - Box Two Front Load Stem - Box Two Top Load Stem - Box One Delta Stem - Box One Center Clamp Stem - Box Two Center Clamp Stem SPECIFICATIONS - 20 Inch 24 Inch - Material High Modulus Unidirectional Carbon Fiber Construction - Steerer Material 7000 Series Aluminum - Finish High Gloss Black - Offset 32mm - Steerer Tube 1-1/8 Inch - Weight - 20": 560g / 19.75oz - 24": 585g / 20.7oz
$329.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most crucial component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks, as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model fork is tailored for smaller racers and includes a lighter weight 1 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts. FEATURES - Overall Reduced Size for Smaller Racers - 1 Inch 7000 Series Aluminum Steerer Tube - Internal Butterfly Steerer Tube and Fork Crown Interface - 10mm Standard Dropouts - Cold-Forged and Bolded Dropouts COMPATIBILITY - Box One Stem Spacers - Box Two Stem Spacers - Box Two Threadless Headset - Box Two 1" Integrated Headset - Box Two 1" Integrated Conversion Headset - Box Two Headset Adapters - Box Two Top Load 1" Stem - Box Hex Lab 1" Stem - Box Two Center Clamp 1" Stem SPECIFICATIONS - 20 Inch - Material High Modulus Unidirectional Carbon Fiber Construction - Steerer Material 7000 Series Aluminum - Finish High Gloss Black - Offset 32mm - Steerer Tube 1 Inch - Weight 397g/14.0oz
$329.00
BB90 is the Trek oversized bottom bracket standard and is only found on Trek road bikes. The shell is 90.5mm wide and is designed to work with 24mm spindles and road cranks and have the bearings inside the shell. The CeramicSpeed Bearings come as two bearings, which are then pressed into the frame. Those two bearings consist of either CeramicSpeed Standard or Coated Bearings. Both feature super smooth, super-round CeramicSpeed Balls contained in hardened-steel races. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in lower drag and longer life. -BB90 is simple and light. The standard is designed to work with 24mm spindles. The bearings work with Shimano and other 24mm cranks, like FSA. - The CeramicSpeed Standard Bearings last at least 3 times longer than other bearings. That's thanks to hardened-steel races and CeramicSpeed Balls that are 100% smoother & 15% harder than the ceramic competition. These bearings have a frictional drag of 0.3-0.4 watts per set, which represents an average 75% drag reduction compared to stock BBs. - The CeramicSpeed Coated Bearings reduce drag by 50% compared to Standard Bearings and an improvement in bearing life of 60%. In The Box: - 2 BB90 bearings - 2 seals - 2 dust covers with integrated spacers - 10ml syringe of All Round Grease - Sticker Sheet
$327.99
Once again, SRAM pushes the envelope with their Powerdome X XG-1090 10-Speed Cassette. Light, stiff, quick, and quiet thanks to the ultra-strong, hollow, one-piece design and StealthRing elastomers, this cassette is worthy of even the nicest road machines. SRAM has added elastomer rings between every cog to provide a 'bed' where the plates of the chain interface with the cog. These elastomer StealthRings make for whisper-quiet operation. It's light, too, with the small 11T cog separate, and the remaining 9 cogs milled from a solid block of tool-grade steel pressed onto a single aluminium cog (the largest one). And, to REDuce even more weight, excess material in the space between each cog is milled away.
$326.99
The Shimano 105 R7020 Dual Control Levers bring the all-conditions confidence of hydraulic disc brakes and refined ergonomics to the quick and intuitive shifting cyclists expect from Shimano 105. features - Great ergonomics cascaded from Ultegra level - Greater reach adjust range - Redesigned internal shifting unit - Greater rider control in all conditions - Quick and intuitive rear shifting operation - Same light shifting operation as top tier systems - Lighter front shifting when paired with FD-R7000 (compared with previous generation)
$314.99
An integral part of the Shimano Ultegra 12-speed road lineup, the FC-R8100 crankset builds upon Shimano's legendary front shifting and transmission efficiency. With new refinements for seamless 12-speed shifting, the Ultegra crank is now offered in a wide variety of lengths, bringing performance and improved fit for smaller riders, triathletes, and riders with specific biomechanic requirements. - Optimal balance of stiffness, strength, weight and rotational performance - Hollowglide structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline
$272.00 - $309.00
Forget front derailleurs; SRAM's Force 1 Crankset brings a game-changing upgrade in performance and reliability to cyclocross, road, and other 700c disciplines. Force 1 combines the durability, simplicity and efficiency that SRAM is known for with their 1x mountain technology. - Single-ring drivetrain simplifies functionality - SRAM X-Sync: wide-tooth, narrow-tooth chainring technology provides maximum chain control - Chainrings available in 42, 50 (110 BCD), and 52 (130BCD) teeth to conquer every course from sand dunes to gravel-road assaults - Unidirectional carbon crank arm matched to a forged aluminum spider for lightweight and durability - Weight 679g-24mm, 172.5mm, 50T, no BB - Bottom bracket not included
$300.00
If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The Rival XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - 1x specific for use with 10-44T XPLR and 10-36T cassettes - SRAM AXS enabled, allowing easy personalization - Chain management keeps the drivetrain quiet and secure - Large X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries - Cage Material (RD): Aluminum - Pulley Bearings Material: Steel - Max Tooth: 44 NOTE: Does not include eTap battery. Compatible with existing eTap batteries.
$300.00
On any surface you can imagine, in any drivetrain configuration, the Rival eTap AXS rear derailleur will handle it. Secure chain management and fast, precise shifting make for a smooth and quiet ride, every time. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - Compatible with both 1x and 2x drivetrains - 36T cog max derailleur works with 10-28T, 10-30T, 10-33T, and 10-36T cassettes - SRAM AXS-enabled, allowing easy personalization - Spring clutch keeps the drivetrain quiet and secure - X-SYNC pulleys for increased durability and efficiency - 36T max rear cog - Battery Not Included
$296.00
The SRAM carbon GX Eagle crankset delivers consistent performance every time out. Featuring SRAM's X-SYNC 2 tooth profile chainring, the Carbon GX crankset is engineered for complete chain control. Each tooth's thickness is precisely toleranced and controlled to work seamlessly with the chain's inner and outer links. DUB technology features a better-engineered bottom bracket and a new spindle design. Together, these allow for a more uniform approach to bottom bracket fitment, better sealing against contamination, and forward and backward compatibility. Now everyone can benefit from a new measure of durability.
$289.99
With the EC70 Aero, you'll stay comfortable while reducing drag. Thanks to the flattened top profile with internal cable routing and MCD shape technology, this handlebar provides more comfort during long days in the saddle while cheating the wind. And with Easton’s proven composite TaperWall technology and Intelligent Flexibility, the EC70 SL is nice and light at just 255 grams (42cm). - Weight of 42cm bar (grams): 255 - Bar Drop (mm): 130 - Drop Bend Style: Compact - Bar Reach (mm): 80 - Material: Carbon - Bar Top Style: Flat
$289.99
Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)
$282.99
Shimano Ultegra R8020 hydraulic shift/brake levers. - Greater rider control in all conditions - Hydraulic disc brake provides the next stage of control - Small bracket size improves ergonomics - Greater reach adjust range - Quick and intuitive rear shifting operation with redesigned internal shifting unit - Model Number: ST-R8020 - Series: Ultegra - Shift Cable Casing: OT-SP41 - Shift Cable: Polymer coated - Average Weight: 550 grams/pair
$280.00
- Excellent Pedaling Efficiency - Optimized Balance Of Weight And Rigidity - Injection Molded Carbon Composite Body - Hollow Cleat Bolt - Efficient Power Transfer - High Stability - Extra-Wide Platform - Efficient Power Transfer/Durability - Reduces Flex And Pedal Body Wear - Stainless Steel Body Plate - Excellent Pedaling Efficiency - Smooth Rotation - 2-Ball Bearing, 1-Wide Roller Bushing - Reliable Durability Performance - Stable And Uniform Load Distribution - Wide Bearing Placement - Rider Tune - Customize The Entry And Release Tension Settings - Adjustable Entry And Release Tension Settings - Shimano 3-Year Limited Warranty - Average Weight: 224g - Shimano SPD-SL cleats included - Standard (52mm) - Wide (56mm)
$279.99
Whether gunning for the podium or just wanting to finish strong, the Speedplay Aero road pedal is aerodynamically engineered to defy wind and boost speed with less effort. The unique 3-axis adjustability allows you to dial in your cleat positioning, micro-adjust your float up to 15 degrees, and decrease your stack height for the most aerodynamic fit on your bike. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. By integrating Speedplay's advanced pedal platform into Aero's streamlined design, a pedal profile is created that minimizes drag, helping you achieve faster finishes and shattered PRs. - Weight: 224g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 39º - Bearing: Sealed
$275.00
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacturer/Seatpost Collar - Weight: 210g (25.4mm), 204g (27.2mm), 204g (30.9mm), 204g (31.6mm)
$166.99 - $268.99
The Shimano 105 double crankset balances weight and efficiency without sacrificing stiffness. It offers Rider Tuned performance with numerous gear combinations, and the wider gear pitch increases chain clearance with small gearings and allows for as short as 410mm chain stays. - Hollowtech II construction - 11-speed - 110mm Shimano Asymmetric BCD
$265.00
Defy the norms. The hollow Si crankset, paired with the any SpideRing, is an impressive upgrade for any mountain or road bike. Where it thrives: Challenging trails, the open road, up and down hills What it's built for: Durability, efficiency Highlights: - Compatible with all SpideRings and HollowGram spindles - Self extracting bolts for easy removal - 172g/arm including hardware
$265.00
Defy the norms. The hollow Si crankset, paired with the any SpideRing, is an impressive upgrade for any mountain or road bike. Where it thrives: Challenging trails, the open road, up and down hills What it's built for: Durability, efficiency Highlights: - Compatible with all SpideRings and HollowGram spindles - Self extracting bolts for easy removal - 172g/arm including hardware
$263.00
Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED
$258.00
The SRAM Rival 22 Mechanical Shifters are modeled after the phenomenal RED shifters. SRAM not only trickled down 11-speed compatibility, but ErgoFit elements such as a slightly longer brake lever to enhance control, independent reach adjustment for brake and shift levers, and a smaller diameter hood with a taller top shape to increase rider control and improve finger wrap. Because you're able to shift from the hoods, drops, and even when sprinting, the Rival levers offer a competitive advantage that can't be touched. The single-lever-shifting design allows for faster, smoother shifts while being completely independent of the brake levers, eliminating the possibility of engaging the brakes when you shift. Plus, the forged aluminum brake lever and shift paddle offer a beautiful balance of low weight and impressive durability.
$257.99
For a streamlined cockpit and easy access to the seat dropper post lever, Shimano's RX810-LA Dual Control Lever integrates the brake lever and dropper lever for fast and effortless operation. - Integrated cable -pulling system - 8.3 mm cable stroke - Control dropper post from shifting lever - Streamlined cockpit minimizes stress and distractions
$255.00
The lightest production damper. Ever. Performance packed with a rock-solid lockout to power up climbs and smash through sprint finishes. - Every detail machined and optimized to save on weight and maximize your performance - Factory tuned compression (in open position) provides the highest level of XC performance, precision and control - Maximum efficiency with a rock-solid lockout
$249.53
The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro ZERØ Ceramic - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 156g
$249.00
Selle SMP's Pro saddle was the first to introduce their patented dropped nose design and large open center channel that eliminate pressure on sensitive areas while still allowing full control in all conditions. The nylon shell is reinforced with carbon for added life and the stainless steel rails provide vibration damping. Plenty of padding keeps you comfortable while the long rails provide ample fore/aft adjustment for the perfect fit.
$249.00
Train for a century, ride across the country, or spins around the block, and Selle SMP's Stratos will have you feeling like you're riding on air. The dropped nose design and large open center channel eliminate pressure on sensitive areas while still allowing full control in all conditions. The nylon shell is reinforced with carbon for added life and the stainless steel rails provide lightweight vibration damping. Plenty of padding keeps you comfortable while the long rails provide ample fore/aft adjustment for the perfect fit.
$240.99
Comfort without sacrificing power Aeolus Pro brings comfort, power, and speed to road riders looking to dig deep and rotate further forward into a more aero position. This uber-light, race-ready saddle was tested and pressure mapped with male and female athletes for the ultimate in proven performance. A shorter overall length with a wider nose and full cut-out ensure targeted support that eliminates soft-tissue pressure for both men and women. Product details - inForm saddles are born of cutting-edge biomechanical research to maximize performance and rider comfort - Designed to support riders in an Aero Road riding position - Full saddle cut-out minimizes soft-tissue pressure allowing for a more powerful, rotated position - Two sizes designed to align saddle with bone structure for both men and women and avoid soft-tissue compression - Oversized carbon rails for lightweight strength. Specific seatpost ear clamps required - Lightweight carbon-reinforced shell provides perfect balance of weight, strength, and compliance - Minimal Pro-level padding offers sleek profile that shaves weight - Available Blendr accessory mounts to cleanly integrate rear light
$240.99
Unlock power and speed with Hilo Pro, a fast and sleek split support zone saddle that offers comfort and support for all-out TT and Tri efforts. The Hilo Pro is designed for symmetric and stable pedaling in multiple positions and provides additional compliance from oversize carbon rails and a strategic dual-layer foam that maximizes comfort so you can maximize your effort. - Aerodynamic Posture 1 is the most forward pelvic rotation, common in triathlons - Split support zone eliminates soft tissue pressure for a more powerful rotated position - Saddle nose structure is designed for stable and symmetric pedaling - Strategic dual layer foam provides soft top layer for comfort and firm base for support - Oversized carbon rails and Channel Flex on bottom of shell for added compliance - inForm BioDynamic products optimize your natural movement for sustained, higher performance - Available Speed Storage system securely holds water bottles, tube, and inflator - Requires oversize rail-compatible seatpost and seatpost ears
$240.99
A streamlined design with fewer moving parts and better seals makes for a dropper post that performs consistently and requires less maintenance. The updated Bontrager Line Dropper Post is easy to set up and now even easier to service. The cable-actuated hydraulic locking design provides proven functionality for bikes with internal routing. - Remote cable actuation with ergonomically designed under-bar lever - Air-sprung hydraulic locking cartridge offers infinite adjustability within dropping range - Keyed chassis prevents rotation for a stable ride - 2-bolt rocker head with micro adjustment allows for easy saddle tilt adjustment - Internal cable routing keeps housing tucked away and free from moving wheel - Includes cable, housing, and 1x under-bar remote lever - On-Bar Drop Line Universal Lever sold separately - Frame must be compatible with internally routed seatpost routing
$239.99
- Remote TT/TRI shifter - Position: DH Bar - Switch type: Bar-end SW for TT, pair - Average weight: 31 grams
$234.99
Shimano's new FC-RX810-2 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater for the specific demands of gravel riding and to maintain tighter gear steps for maintaining pedaling rhythm. The 2x11-speed crank is available in a 48-31T, 40T, and 42T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Gravel gear ratios preserve riding rhythm over rough surfaces with wider tires - Optimum gearing for mixed terrains and riding styles - Wide-range double - Gear combinations: 48-31T, 40T, 42T
$231.00
Ride anywhere with this wide range XG-1275 cassette—it always provides the right gear. Fast on the flats. Control on the climbs. Dictate your own pace, anywhere. FULL PIN technology uses lightweight, stamped steel cogs held together with high-strength stainless steel pins. The result: a cassette that’s light and strong. The open design similar to SRAM's X-DOME cassette aids in mud clearance, giving you cleaner shifting performance and longer component life. X-GLIDE2 improves both inboard and outboard shifting, as well as chain retention. - Cassette Body Type: SRAM XD Cogs: - 10 – 50T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 50 - 10 – 52T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 52
$229.99
eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother. - Weight: 225g - 235g - Angle: -6° (only) - Stack Height: 49mm - Stem Clamp: 31.8mm
Page 1 of 22 Next page